Hi All.
Been reading everyday for a while and have stayed pretty quite.
I recently bought a vacant block in Cloverdale. Its zoned r20/r40 on 871sqm. The block is relatively flat and level but its not rectangular in shape. It's skinnier at the front and tappers out to the rear on one side of the block.
Im just after peoples opinions in regarding to what i build.
In the city of belmont they require 50% of the development to be double storey.
Few things in question.
Should i try fit four 3/2s small in size dwellings on the one site?
Or should i build 3 large 4x2s? These would consist of either two double storeys and one single, or all double storey.
Just after some input. My main strategy would be to build and hold onto all 3.
Would i be better off building cheaply or going for a nicer build quality with better elevations and quality finishes?
I've got some elevation plans from a builder. Please voice your opinions.
Been reading everyday for a while and have stayed pretty quite.
I recently bought a vacant block in Cloverdale. Its zoned r20/r40 on 871sqm. The block is relatively flat and level but its not rectangular in shape. It's skinnier at the front and tappers out to the rear on one side of the block.
Im just after peoples opinions in regarding to what i build.
In the city of belmont they require 50% of the development to be double storey.
Few things in question.
Should i try fit four 3/2s small in size dwellings on the one site?
Or should i build 3 large 4x2s? These would consist of either two double storeys and one single, or all double storey.
Just after some input. My main strategy would be to build and hold onto all 3.
Would i be better off building cheaply or going for a nicer build quality with better elevations and quality finishes?
I've got some elevation plans from a builder. Please voice your opinions.