Masters flat pack kitchen.

We just installed a kitchen set fully supplied from masters for the inlaws. They bought everything from them due to cost and great range at masters. It came with easy to follow instructions and you don't need much diy knowledge. A good drill with Phillips head bit, screwdrivers, spirit level and tape measure is pretty much all we used. If drilling into a brick wall you'll need a masonry/ hammer drill for who you fix it to the wall. It was an inline kitchen so very quick and had it done in a day. Good reference is just type in "Bunnings kitchen" in YouTube (yes Bunnings,) and you'll see handy videos that take up little to no time to watch.

Benchtop to be 900mm high
Over head cabinets 600mm above the bench top.
 
Just make sure you have the option to install a metal stainless protection guard if you
are installing under bench oven , it protect the doors either side of the oven from heat.
A lot of cheaper manufacturers do not supply one.
 
Just make sure you have the option to install a metal stainless protection guard if you
are installing under bench oven , it protect the doors either side of the oven from heat.
A lot of cheaper manufacturers do not supply one.

these are only needed when the oven purchased doesn't have side deflectors built in
 
Here's the before and after pictures. Very happy with the result. Cost $2600 for flat pack and $ 720 for the bench top fitted.
 

Attachments

  • image.jpg
    image.jpg
    603.5 KB · Views: 260
It's the horrible green one. You can't tell from the picture but all the doors are warped and the bench top is made from toung and groove flooring.
I made it all by hand years ago.
 
Back
Top