Hi,
I am in the process of regularise my garage converted 36-sqm granny flat.
The granny flat has been there for around 20 years.
Council requires the following
1. on concrete slab & plastic sheeting on top of concrete slab
2. minimum height of 2.4m
3. laundry to be installed (a tap and a sink will do)
4. 240V fire alarm must be installed
5. insulation of walls and ceiling
6. water proofing of shower area
#6 seems to be an easy job, rip off tiles, water proof and then re-tile.
The original quote is around $1000.
After inspection by a tiler, it turns out that the state of the sheeting behind the tiles are rotting and unstable.
It was an $1000 job and now it becomes a full renovation job.
$1000
Ripout and disposal of old tiles /sheets / timber
$855
Reinforce timber batons studs and beams
Re-sheet bathroom
Supply of blue/viler bored /studs glue
Screws and labor
$660
To waterproof bathroom to NSW specs for supply of waterproofing and webbing rolls /wall and floor priming in recommendations of materials supplier /and labor
$350
To screed floor so that the correct fall is archived in order for water run off
Including supply of sand / cement / Floor wast's/aluminium angles / and labor
$3800
To tile bathroom both wall and floors
Re install vanity / tapes/ toilet / mirror / shower screen / soap holder/ tall rail holder / this includes supply of
Tapes /spouts /soap holder/tail rail holder /mirror (cheep) /a standard vanity to suit bathroom / shower screen ( framed or semi framed )/
Glue /labour
$620
For Electrical IE replace light/heat switch and power points and fit out of IXL fan for supply of materials and labor
$195
Painting of ceiling /windows/ doors frames for supply and labor
Total = $6580 ex GST or $7238 inc GST
Is it a reasonable price?
I just want water proofing of the shower area and now it becomes a full bathroom renovation.
Could someone please recommend a good tradie for this job in Central Coast area?
Thanks in advance
I am in the process of regularise my garage converted 36-sqm granny flat.
The granny flat has been there for around 20 years.
Council requires the following
1. on concrete slab & plastic sheeting on top of concrete slab
2. minimum height of 2.4m
3. laundry to be installed (a tap and a sink will do)
4. 240V fire alarm must be installed
5. insulation of walls and ceiling
6. water proofing of shower area
#6 seems to be an easy job, rip off tiles, water proof and then re-tile.
The original quote is around $1000.
After inspection by a tiler, it turns out that the state of the sheeting behind the tiles are rotting and unstable.
It was an $1000 job and now it becomes a full renovation job.
$1000
Ripout and disposal of old tiles /sheets / timber
$855
Reinforce timber batons studs and beams
Re-sheet bathroom
Supply of blue/viler bored /studs glue
Screws and labor
$660
To waterproof bathroom to NSW specs for supply of waterproofing and webbing rolls /wall and floor priming in recommendations of materials supplier /and labor
$350
To screed floor so that the correct fall is archived in order for water run off
Including supply of sand / cement / Floor wast's/aluminium angles / and labor
$3800
To tile bathroom both wall and floors
Re install vanity / tapes/ toilet / mirror / shower screen / soap holder/ tall rail holder / this includes supply of
Tapes /spouts /soap holder/tail rail holder /mirror (cheep) /a standard vanity to suit bathroom / shower screen ( framed or semi framed )/
Glue /labour
$620
For Electrical IE replace light/heat switch and power points and fit out of IXL fan for supply of materials and labor
$195
Painting of ceiling /windows/ doors frames for supply and labor
Total = $6580 ex GST or $7238 inc GST
Is it a reasonable price?
I just want water proofing of the shower area and now it becomes a full bathroom renovation.
Could someone please recommend a good tradie for this job in Central Coast area?
Thanks in advance