I got the quote below to replace the broken hotwater unit in the PPOR. It is not like for like. Currently, it is 80L and internal. The replacement is 250L and going to external including concreting. Below is the breakdown. Please let me know, if the quote is fair.
** Price to supply and install new Hot Water Unit to house ** -- $2200
- Isolate water and power to hot water tank.
- Drain and disconnect existing hot water tank in laundry.
- Supply and install new Rheem Storage 250 Litre hot water tank to position on outside wall as discussed.
- Supply and install new concrete slab for support.
- Remove sheeting in laundry wall that is covering pipework.
- Extend existing electrical connection back through to under house and then through to outside wall and connect to new tank.
- Extend existing cold water pipe back through to under house and then through to outside wall and connect to new tank.
- Extend existing hot water pipe back through to under house and then through to outside wall and connect to new tank.
- Alter and connect cold water pipe.
- Alter and connect hot water pipe.
- Turn on power and water to new tank and test all works for leaks and working order.
- Purge all air from outlets throughout house.
- Re sheet wall with fibro sheeting to where piping was hidden.
- Customer to sand and paint wall once re sheeted.
- Clean up all mess made on completion.
** Price to connect toilet ** --- $680
- Customer to supply toilet suite to laundry.
- Drill through brick wall to under house.
- Extend 100mm pvc pipe through to under house and connect into existing sewer pipe.
- Fix cistern on wall above bowl.
- Connect onto existing water supply from under house and make new point for toilet.
- Connect onto water pipe and install shut off valve.
- Connect up toilet to waste and water.
- Cement or silicone seal toilet to floor.
- DO NOT USE TOILET FOR 24 HOURS TO ALLOW SEAL TO SET.
- Turn on water and test for leaks and working order.
- Clean all mess on completion.
** Price to supply and install new Hot Water Unit to house ** -- $2200
- Isolate water and power to hot water tank.
- Drain and disconnect existing hot water tank in laundry.
- Supply and install new Rheem Storage 250 Litre hot water tank to position on outside wall as discussed.
- Supply and install new concrete slab for support.
- Remove sheeting in laundry wall that is covering pipework.
- Extend existing electrical connection back through to under house and then through to outside wall and connect to new tank.
- Extend existing cold water pipe back through to under house and then through to outside wall and connect to new tank.
- Extend existing hot water pipe back through to under house and then through to outside wall and connect to new tank.
- Alter and connect cold water pipe.
- Alter and connect hot water pipe.
- Turn on power and water to new tank and test all works for leaks and working order.
- Purge all air from outlets throughout house.
- Re sheet wall with fibro sheeting to where piping was hidden.
- Customer to sand and paint wall once re sheeted.
- Clean up all mess made on completion.
** Price to connect toilet ** --- $680
- Customer to supply toilet suite to laundry.
- Drill through brick wall to under house.
- Extend 100mm pvc pipe through to under house and connect into existing sewer pipe.
- Fix cistern on wall above bowl.
- Connect onto existing water supply from under house and make new point for toilet.
- Connect onto water pipe and install shut off valve.
- Connect up toilet to waste and water.
- Cement or silicone seal toilet to floor.
- DO NOT USE TOILET FOR 24 HOURS TO ALLOW SEAL TO SET.
- Turn on water and test for leaks and working order.
- Clean all mess on completion.