As some of you may remember, I have some problem with unapproved granny flat in Campbeltown council area (thread: http://somersoft.com/forums/showthread.php?t=60734). Main issue was that side boundary is <0.9m. Since then the property has been rented to a family as one house, and the gf area is used as storage (it's approved as garage & storage with toilet).
Anyways, a couple of years went by, there was recently a change of regulation re. side boundary, and I'm now in the process of getting the structure approved as gf again via private certifier route, with the help of Serge/Brazen.
While we're doing this, I'm looking at possibility of making it a 2-bedder rather than a 1-bed gf. Structure 14mx4.2m, so close to 60m2. Layout is a bit tricky, as we'd have to make the side wall fire-rated, so there could be no opening on that side. I wonder if any of you could help with suggestions on possible layout? Attached are the site plan and 2 possible layout that I did myself. First try, so please excuse the amateur-ness of it
Thanks all.
Anyways, a couple of years went by, there was recently a change of regulation re. side boundary, and I'm now in the process of getting the structure approved as gf again via private certifier route, with the help of Serge/Brazen.
While we're doing this, I'm looking at possibility of making it a 2-bedder rather than a 1-bed gf. Structure 14mx4.2m, so close to 60m2. Layout is a bit tricky, as we'd have to make the side wall fire-rated, so there could be no opening on that side. I wonder if any of you could help with suggestions on possible layout? Attached are the site plan and 2 possible layout that I did myself. First try, so please excuse the amateur-ness of it
Thanks all.