floor
Hi Evisional;
Good decision to polish the kitchen floor, I'm in progress of renovation an IP.
The kitchen floor has three layers of vinyl, the last layer was quite a bit hard to take out as it was glued down to the timer floor boards.
After removed the glue (by scrapping and a heat gun) and has the whole house sanded and polished, it looks so good.
Remember to remove the glue by scrapping them off with a heat gun, otherwise the glue will sticks to the sanding machine when you're sanding.
Get the professional to do the sanding and polishing if it is your first time, the cost is not that much, they normally charge $20 to $22 per square metre for cash and the result will be much better.
Good luck
Regards Tri